Mold Remediation & Co.
Cleaning · 5 min read

Can you paint over mold? (No, and here's what to do instead)

Last reviewed · Based on EPA guidance · Editorial policy

Quick answer

No. The EPA says not to paint or caulk moldy surfaces: clean the mold and dry the surface first, because paint applied over mold is likely to peel. Paint also hides the problem without fixing the moisture that caused it. Clean hard surfaces, replace moldy porous materials like drywall, fix the water source, and then paint.

A paint roller applying blue paint to a white wall
Photo: Theme Photos on Unsplash

Why painting over mold fails

  • It peels. The EPA says paint applied over mold is likely to peel.
  • The mold stays. Paint covers the stain, but mold that has grown into the material is still there, and dead mold can still cause allergic reactions, according to the EPA.
  • The cause stays. Mold grows where there's moisture. If the leak, condensation or humidity isn't fixed, it comes back through the new paint.
  • It hides evidence. When you sell a house or file an insurance claim, painted-over mold can look like concealment.

The right order of work

  • Find and fix the moisture. Check for plumbing leaks, roof leaks, condensation and poor ventilation.
  • Judge the material. Hard, non-porous surfaces can be cleaned. Porous materials such as drywall, ceiling tile and insulation may have to be removed and replaced, according to the EPA.
  • Clean. Scrub hard surfaces with detergent and water. For anything over about 10 square feet, the EPA recommends following its professional remediation guidance.
  • Dry completely. The EPA's advice is to dry surfaces completely before painting.
  • Prime and paint. Use a stain-blocking primer if there's residual staining on a cleaned, sound surface, then paint.

What about mold-resistant paint?

Mold-resistant paints and primers can help clean, dry surfaces stay mildew-free in damp rooms like bathrooms. They are a prevention tool, not a treatment. Applied over existing mold, they run into the same problem as any paint.

Signs the wall needs more than cleaning

  • Soft, crumbly or bubbling drywall
  • Stains that come back after cleaning
  • A musty smell even after the surface looks clean
  • Mold on a wall shared with a bathroom, or under a window. See mold behind walls.

Written by the Mold Remediation & Co. editorial team from the primary sources listed below. This article is general information, not medical or legal advice. Read our editorial policy.

Questions

Will Kilz or another primer kill mold?

Stain-blocking primers cover stains. They don't remove mold or fix moisture. The EPA says to clean and dry moldy surfaces before painting.

Can I paint over mold after spraying it with bleach?

Even if the mold is dead, the EPA says it can still cause allergic reactions and should be removed. Clean it off, dry the surface, then paint.

What if I already painted over mold?

Watch for peeling, staining and odor. If they appear, remove the paint and affected material, fix the moisture source, and repaint once dry.

Sources

Find mold remediation pros by state

Get it handled properly, the first time.

Compare verified mold remediation pros near you in under a minute.

Find a contractor I'm a contractor