What the EPA says
According to the US Environmental Protection Agency, mildew refers to certain kinds of mold or fungus, and the word is often used loosely for mold growth with a flat growth habit. In other words, all mildew is mold, but people usually say "mildew" when they mean thin, surface-level growth.
That distinction is useful in everyday conversation, but it doesn't change what you should do. Mold of any kind needs moisture to grow, and the fix is always the same two steps: clean it and dry the area so it can't return.
How to tell them apart
You can't identify a species by eye, but appearance and location tell you a lot about how deep the problem goes.
| Usually called "mildew" | Usually called "mold" | |
|---|---|---|
| Look | Flat, powdery or thin; white, gray or light brown | Fuzzy, slimy or raised; green, black, brown or other colors |
| Where | Shower walls, grout, windowsills, fabrics | Drywall, wood, insulation, carpet, behind walls |
| Depth | On the surface of hard materials | Can grow into porous materials |
| Typical fix | Scrub with detergent and water, then dry | Clean hard surfaces; porous materials may need to be removed |
Why the surface matters more than the name
Growth on glass, tile or a painted sill sits on top of the material, so scrubbing usually removes it. Growth on drywall, ceiling tile or carpet can root into the material. The EPA notes that porous materials such as ceiling tiles and carpet may have to be thrown away if they become moldy, because mold can be hard or impossible to remove from them completely.
So the useful question isn't "mold or mildew?" It's "what is it growing on, and how big is the area?"
When a mildew stain is a warning sign
- It keeps coming back in the same spot after cleaning: there's an ongoing moisture source. See why mold keeps coming back.
- You smell mustiness but can't see much: growth may be hidden behind walls or under floors. See musty smell in the house.
- The area is larger than about 10 square feet: the EPA suggests following its professional remediation guidance at that size.
- It followed a leak or flood: wet materials that weren't dried within 24 to 48 hours often grow mold inside, not just on the surface.
How to clean it
For small areas on hard surfaces, the EPA's advice is simple: scrub with detergent and water, then dry completely. Wear gloves and eye protection, and keep the room ventilated. Our guide to whether bleach kills mold explains when bleach is and isn't worth using.
Then deal with the moisture. Run the bathroom fan during and after showers, wipe condensation off windows, and keep indoor humidity below 60%, ideally 30 to 50%, as the EPA recommends. Our humidity guide covers how to measure and lower it.
Written by the Mold Remediation & Co. editorial team from the primary sources listed below. This article is general information, not medical or legal advice. Read our editorial policy.
Questions
Is mildew less dangerous than mold?
Mildew is a kind of mold, so the same health cautions apply. The CDC says mold can cause nasal congestion, throat irritation, coughing or wheezing, eye irritation or skin rash in sensitive people, whatever the type.
Can I just paint over mildew?
No. The EPA says not to paint or caulk moldy surfaces: clean and dry them first, because paint applied over mold is likely to peel. See our guide to painting over mold.
Does a mildew smell mean there is mold?
A musty smell usually means mold or mildew is growing somewhere, even if you can't see it. Look for damp spots, leaks and condensation.