Mold Remediation & Co.
Prevention · 5 min read

The best indoor humidity level to prevent mold

Last reviewed · Based on EPA guidance · Editorial policy

Quick answer

The EPA recommends keeping indoor relative humidity below 60%, and ideally between 30% and 50%, to prevent mold. A basic hygrometer, which the EPA says costs about $10 to $50, tells you where you stand. Exhaust fans, dehumidifiers, air conditioning and fixing leaks bring humidity down.

Close-up of a hygrometer dial measuring indoor humidity
Photo: Jonathan Cosens Photography on Unsplash

The number to aim for

Relative humidityWhat it means
Below 30%Very dry. No mold risk, but can feel uncomfortable
30% – 50%EPA's ideal range
50% – 60%Acceptable. Keep an eye on bathrooms and basements
Above 60%EPA says keep it below this. Mold risk rises

How to measure it

Buy a digital hygrometer (humidity meter). The EPA puts the cost at about $10 to $50. Check the rooms most likely to be damp: basement, bathrooms, laundry room and any room where windows fog up. Take readings in different seasons. Humidity often peaks in summer, and condensation problems peak in winter.

7 ways to lower indoor humidity

  • Use exhaust fans when showering, cooking and running the dishwasher, as the EPA recommends. Make sure they vent outdoors, not into the attic.
  • Vent appliances outside. The EPA lists clothes dryers, stoves and kerosene heaters as moisture sources that should vent outdoors where possible.
  • Run a dehumidifier in basements and crawl spaces, and empty or drain it regularly.
  • Use air conditioning in humid weather. It removes moisture as it cools.
  • Fix leaks fast and dry wet materials within 24 to 48 hours, the window in which the EPA says mold usually won't grow.
  • Insulate cold surfaces such as cold water pipes to stop condensation, another EPA recommendation.
  • Increase air movement. Open doors between rooms and use fans so damp air doesn't sit in closets and corners.

Signs your humidity is too high

Written by the Mold Remediation & Co. editorial team from the primary sources listed below. This article is general information, not medical or legal advice. Read our editorial policy.

Questions

What humidity does mold grow at?

Mold risk rises when indoor humidity stays above about 60%, which is why the EPA recommends staying below 60% and ideally between 30% and 50%. Surfaces that stay wet, such as from leaks or condensation, can grow mold at any room humidity.

Is 55% humidity too high?

It is within the EPA's acceptable range (below 60%) but above the ideal 30–50%. If you see condensation or mildew, bring it down.

Does a dehumidifier prevent mold?

It helps by lowering humidity, especially in basements and crawl spaces. It won't fix a leak or dry soaked materials on its own.

Sources

Find mold remediation pros by state

Get it handled properly, the first time.

Compare verified mold remediation pros near you in under a minute.

Find a contractor I'm a contractor